The U2D2 power hub board combines with the U2D2 to supply a variety of external
power sources to Dynamixels. The board is capable of supplying power to all
Dynamixels with the SMPS port,
terminal block, and 2P power connector. The board has holes to fix the U2D2
module and can be assembled using the rivets supplied in the package.
-Easily powers ON/OFF with the power switch
U2D2 Power Hub Board
*U2D2 and robot cables not included.
48mm x 57mm
7.4V ~ 24.0V
- Use the Molex-JST Convertible Cable (Use 3P or 4P based
on your communication selection)
DYNAMIXEL X-Series, PRO+ Series
- USe the JST Cable. (Use 3P or 4P based on your
The U2D2 power hub board only has a JST type
connector and requires a convertible cable when connecting to Molex type
*Required cables: Min 2 pcs (U2D2 <-> DYNAMIXEL, U2D2
Power Hub Board <-> DYNAMIXEL)
When using the
terminal block, please pay attention to the polarity when using external power.
side is - and Right side is +
Various pins are
exposed behind the board. We recommended to assemble and use the supporter